How to put in PVC Strip Curtains: A Stage-by-Step Guide

Here's a move-by-move manual on how to install PVC strip curtains:

Materials You'll have:

PVC strip curtains
Mounting components (normally provided Along with the curtains)
Tape measure
Pencil or marker
Drill
Screws

Step 1: Evaluate the doorway

Make use of a tape measure to ascertain the height and width from the doorway where you want to put in the PVC strip curtains. Ensure that you measure the width of your doorway at the highest, middle, and base, and use the widest measurement.

Move 2: Minimize the PVC strips to length

Utilizing the measurements from phase one, Minimize the PVC strips to the appropriate duration. In case you have lots of strips to chop, consider using a straight edge in addition to a utility knife to speed up the procedure.

Action 3: Attach the mounting components

Using a drill and screws, attach the mounting components to the very best of your doorway. Be sure the hardware is stage and protected.

Stage 4: Cling the PVC strips

Commence at a person side of your doorway and get more info hang the PVC strips with the mounting hardware. Be sure the strips are evenly spaced and cling straight. If required, regulate the strips by sliding them along the mounting hardware.

Move 5: Trim the strips

If any from the strips are far too long, make use of a set of scissors or simply a utility knife to trim them to the appropriate size.

Action 6: Complete the installation

When the entire PVC strips are hung and trimmed, make certain They can be thoroughly aligned and modify them as essential. You may additionally want to include a fat bar to The underside of your curtains to maintain them from swinging within the breeze.

That's it! You now have PVC strip curtains set up with your doorway.